VIRDI 4000
TM
User’s Manual
50
UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,
E-Mail:sales@unioncomm.co.kr, http://www.unioncomm.co.kr/eng
Initialize” and the following screen appears:
1. Init Config
2. Delete Log
3. Init Terminal
To initialise configuration settings, press [1].
To initialise the record, press [2].
To factory default settings, press [3].
3.8.6.1. Configuration settings initialisation
◆ [*] [6] ‘084265’ [ENTER] [6] ◆[1]
<Init Config>
[ Y=1 / N=2 ] :
To initialise configuration settings, press [1]. If
not, press [2].
All the configuration settings except for Mac (physical) address are initialised;
users’ information and authentication records are not deleted.
※ If this configuration settings initialisation is done, the language for voice
output and display characters change to English. If you need to set as
another language, refer to the following: “6. Set Device” “1. System Config”
<Language>: set to 0~4”
After this configuration setting initialisation is successfully done, it moves to the
upper menu together with a “success” buzzer sound.
3.8.6.2. Authentication record initialisation
◆ [*] [6] ‘084265’ [ENTER] [6] ◆[2]
<Delete All Log>
[ Y=1 / N=2 ] :
To initialise the log data, press [1].
If not, press [2].
All the log data related to authentication is deleted; configuration settings and
users’ information are not deleted.
After this initialization is successfully done, it moves to the upper menu together
with a “success” buzzer sound.
3.8.6.3. Factory default initialisation
<Init Terminal>
[ Y=1 / N=2 ] :
To initialise everything to factory default, press
[1]. If not, press [2].
Except for the Mac (physical) address stored in the terminal, all configuration
To Next Page
Loading...
Need help?
General
