Universal Robots UR5 Service Manual

• Replace blue lids if cracked or damaged.
• Inspect that screws for blue lids are in place and properly tightened.
• Replace screws, tighten properly if necessary.
• Correct torque value for screws on blue lids are 0.4Nm.
If any damage is observed on a robot within the warranty period, contact the distributor from
which the robot has been purchased.
UR5 12 Service Manual
4.Recommended Inspection Activities
Copyright © 2009–2021 by UniversalRobotsA/S. All rights reserved.

Universal Robots UR5 Specifications

General

Brand	Universal Robots
Model	UR5
Category	Robotics
Language	English