uponor.com l 9
A380265C Controller (X-265) with
Communication Module (R-208)
Warning!
Per Table 3-1, use Uponor 24V actuators to ensure
compatibility with the controller.
The Controller operates the actuators, which, in turn,
affect the flow of the supply water to change the
indoor temperature using information transmitted from
registered thermostats and system parameters.
The Controller, which is typically located near the system
manifolds, can operate up to six (6) thermostats and eight
(8) actuators.
Main Features
• Integrated Dynamic Energy Management functions
• Autobalancing (default)
• Comfort setting, room bypass, supply temperature
monitoring (requires Smatrix Pulse App and
Communication Module)
• Electronic control of 24V actuators
• Connects up to eight (8) actuators
• Two-way communication with up to six (6) thermostats
• Heating/cooling outputs, and/or Comfort/ECO mode
switched by dry contact or Smatrix Pulse App (requires
Communication Module)
• Separate relays for control of pump and boiler (other
control functionality available via Smatrix Pulse App)
• Valve and pump exercise
• Relative humidity control (requires Smatrix Pulse App)
• Control of combined underfloor heating/cooling and
ceiling cooling or fan coils (requires Smatrix Pulse App)
• Lower indoor temperature in heating mode or increase
indoor temperature in cooling mode with ECO mode; ECO
mode activates in all rooms at once using a dry contact
or Smatrix Pulse App (requires Communication Module)
• 115V plug-in power cord (42")
Options
• App connectivity via Communication Module (remote
connection requires connection to Uponor Cloud services)
• Increase controller functionality by adding an Expansion
Module for up to six (6) additional thermostats and up to
six (6) additional actuators
• Connect up to four controllers into one system
(requires Smatrix Pulse App)
• Modular placement (detachable Transformer)
• Free placement and orientation when installing Controller
(except Communication Module)
Included Components
• A380265C Controller (X-265) with Communication
Module (R-208)
• Power supply/Transformer (part number A3850050)
• DIN rail
• Mounting hardware
• End cap
A3801262 Expansion Module (M-262)
The Expansion Module will increase the Controller
capacity with six (6) additional thermostats along with
six (6) more actuators. The Expansion Module operates
the actuators, which, in turn, affect the flow of the
supply water to change the indoor temperature using
information transmitted from registered thermostats and
system parameters.
Main Features
• Electronic control of 24V actuators
• Connects up to six (6) additional actuators
• Two-way communication with up to six (6) additional
thermostats
• Plug-in connection with the Controller
• No additional power wiring needed
Included Components
• A3801262 Expansion Module (M-262)
Figure 3-4: A380265C Controller
(X-265) with Communication
Module (R-208)
Figure 3-5: A3801262 Expansion Module (M-262)
To Next Page
Loading...
