Utax 206ci

4-14
Copying > Copying Functions
3 Sets the boundary line type.
4 Select the original orientation.
If the original is placed on the platen, replace the original and press the Start key.
After scanning all originals, press [Finish Scan] to start copying.
Ready to copy. (Full Color)
Combine - Border Line
None
10:10
Solid Line
Dotted Line
Positioning Mark
1/1
OK
OKCancel
Combine - Others
Combine
10:10
Cancel
Border Line
< Back
1/1
OK
2 in 1 (L to R/T to B)
None
Original Orientation
Top Edge on Top
Ready to copy. (Full Color)
GB0017_01 GB0019_00
1
2
Combine - Others
Combine
10:10
Cancel
Border Line
< Back
1/1
OK
2 in 1 (L to R/T to B)
None
Original Orientation
Top Edge on Top
Ready to copy. (Full Color)
GB0017_01
GB0015_04
1
Combine - Original Orientation
10:10Ready to copy. (Full Color)
Top Edge on Left
Top Edge on Top
Cancel
1/1
OK
2