EasyManua.ls Logo

Utax 206ci

Utax 206ci
382 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10-24
Troubleshooting > Responding to Messages
1104 Failed to send the e-mail. Check the e-mail address.
NOTE: If the address is rejected by the domain, you cannot
send the e-mail.
6-20
1105 Failed to send via SMB. Select [On] of the SMB settings on the Embedded Web Server
RX.
2-26
Failed to send the e-mail. Select [On] of the SMTP settings on the Embedded Web Server
RX.
Failed to send via FTP. Select [On] of the FTP settings on the Embedded Web Server
RX.
1106 Failed to send the e-mail. Check the sender address of SMTP on the Embedded Web
Server RX.
2-26
1131 Failed to send via FTP. Select [On] of the secure protocol settings on the Embedded Web
Server RX.
2-26
1132 Failed to send via FTP. Check the followings of the FTP server.
Is FTPS available?
Is the encryption available?
2-26
2101 Failed to send via SMB. Check the network and SMB settings.
The network cable is connected.
The hub is not operating properly.
The server is not operating properly.
Host name and IP address
Port number
2-26
Failed to send via FTP. Check the network and FTP settings.
The network cable is connected.
The hub is not operating properly.
The server is not operating properly.
Host name and IP address
Port number
Failed to send the e-mail. Check the network and Embedded Web Server RX.
The network cable is connected.
The hub is not operating properly.
POP3 server name of the POP3 user
SMTP server name
2102
2103
Failed to send via FTP. Check the followings of the FTP server.
Is FTP available?
The server is not operating properly.
Failed to send the e-mail. Check the network.
The network cable is connected.
The hub is not operating properly.
The server is not operating properly.
2201
2202
2203
2231
Failed to send the e-mail.
Failed to send via FTP.
Failed to send via SMB.
Failed to send via FTP.
Check the network.
The network cable is connected.
The hub is not operating properly.
The server is not operating properly.
2204 Failed to send the e-mail. Check the e-mail size limit of the SMTP settings on the
Embedded Web Server RX.
2-26
Code Error Corrective Actions Reference
Page

Table of Contents

Related product manuals