FAX Operation (Advanced)
4-44
Using Polling Reception
NOTE: When the other party is using sub addresses, refer to Using Polling Reception with Sub Addresses
below.
1 Press the FAX key.
2 Press the Function Menu key.
3 Press the or key to select [FAX RX Polling].
4 Press the OK key.
5 Press the or key to select [On].
6 Press the OK key.
7 Select the destination.
NOTE: Only fax numbers can be selected as
destinations.
You can select destinations using a combination of
numeric keys input and Address Book or One-touch
keys selection.
When On is selected in Entry Check for New
Destination, a confirmation screen is displayed for the
entered FAX number. Re-enter the same FAX number
and press the OK key. For details, refer to Destination
confirmation screen before transmission in the
Operation Guide for the machine.
8 Press the Start key. The operations for reception
begin.
NOTE: When On is selected in Destination Check before Send, a destination confirmation screen is displayed
when you press the Start key. For details, refer to Confirmation Screen of Destinations on page 5-13.
To Next Page
Loading...
