Setup and Registration
6-24
Operation at the Sending System
When sending originals by encrypted transmission, use the Address Book registered for encryption or set
encrypted transmission when dialing directly using the numeric keys.
NOTE: Encrypted transmission can be also used in broadcast transmission.
With encryption communication, you cannot conduct sub address communication.
1 Register the encryption key you have arranged
with the receiving system. (Refer to Registering an
Encryption Key on page 6-22.) When an
encryption key has already been registered, go to
the next step.
2 Press the FAX key.
3 Place the originals.
4 Use the numeric keys to enter the FAX number of
the other party, and press [Detail] (the Right
Select key).
NOTE: When encrypted transmission has been set to
a destination in the Address Book or One-touch keys,
you can use the destination.
5 Press the or key to select [Encrypted TX].
6 Press [Change] (the Right Select key).
7 Press the or key to select [On].
8 Press the OK key.
FAX No. Entry:
A
b
0123456789
*
[ Chain ] [ Detail ]
FAX Detail:
C
b
Encrypted TX: 2/ 4
Off
[ Change ]
Encryption:
a
b
1
*Off
*********************
2
On
To Next Page
Loading...
