FAX Operation (Advanced)
4-6
Standby Transmission
During a communication, you can scan originals and schedule a next transmission. When the first
communication is completed, the machine automatically starts the scheduled next transmission. When using
standby transmission, you do not need to wait when a communication has prolonged due to broadcast
transmission.
NOTE: For the transmission method, use memory transmission. To select memory transmission, refer to
Selection of Transmission Method on page 3-2.
You can use other functions such as broadcast transmission.
Together with delayed transmission, up to 30 transmissions can be scheduled.
1 Press the FAX key.
2 Place the originals.
3 Select the destination, and set transmitting
functions if you want to use any.
4 Press the Start key. Scanning of the originals
starts, and the next transmission is scheduled.
NOTE: When On is selected in Destination Check
before Send, a destination confirmation screen is
displayed when you press the Start key. For details,
refer to Confirmation Screen of Destinations on
page 5-13.
5 When the communication is completed, the
scheduled transmission will begin.
To Next Page
Loading...
