Utax P-C2665 MFP

FAX Operation (Basic)
3-9
3
FAX Automatic Reception
When using this machine as a FAX-dedicated machine that does not receive telephone calls, set the machine
to FAX-dedicated reception. No special operation is required when receiving faxes.
NOTE: When you are receiving DRD service from a telephone company, change the reception method to
[Auto (DRD)]. For details, refer to DRD Reception on page 6-11.
Part that is operated
Reception Method
This machine allows the following five reception methods.
• Auto (Normal)
• Auto (FAX/TEL) (Refer to page 6-2
.)
• Auto (TAD) (Refer to page 6-4
.)
• Auto (DRD) (Refer to page 6-11
.)
• Manual (Refer to page 4-11
.)
Checking and Changing the Reception Method
1 Press the System Menu/Counter key.
2 Press the  or  key to select [FAX].
3 Press the OK key.
4 Press the  or  key to select [Reception].
5 Press the OK key.