FAX Operation (Advanced)
4-8
Chain Dial
Chain dial is a function that allows you to dial by linking fax numbers of the receiving systems with a chain
number created with a number common to several destinations. By setting a toll free number and an area code
to a chain number, you do not need to enter such numbers for each transmission.
NOTE: You can use the chain number at the head of the fax number of the receiving system.
As an example, when using ‘212’ as the chain number
1 Press the FAX key.
2 Place the originals.
3 Enter ’212’ using the numeric keys.
4 Press [Chain] (the Left Select key).
5 Enter the fax number to connect to the chain
number.
Use the numeric keys to enter a fax number
1 ’212’ is already entered, and then enter the
fax number.
NOTE: When On is selected in Entry Check for
New Destination, a confirmation screen is
displayed for the entered FAX number. Re-enter
the same FAX number and press the OK key. For
details, refer to Destination confirmation screen
before transmission in the Operation Guide for the
machine.
2 After entering all the destinations, press the
OK key.
Select fax number from the Address Book
1 Press the Address Book key.
2 Press the or key to select [Address
Book], and press the OK key.
Fax No. Entry:
A
b
212
*
[ Chain ] [ Detail ]
To Next Page
Loading...
