Utax P-C2665 MFP

Checking Transmission Results and Registration Status
5-7
5
6 Press the  or  key to select [FAX RX Result].
7 Press the OK key.
8 Press the  or  key to select [Off] (not to print),
[On] (to print) or [Error/SubAddress].
9 Press the OK key.
Report for Job Canceled before Sending
Print a send result report when the job is canceled before being sent.
1 Press the System Menu/Counter key.
2 Press the  or  key to select [Report].
3 Press the OK key.
4 Press the  or  key to select [Result Rpt Set.].
5 Press the OK key.
6 Press the  or  key to select [Send Result].
Result Rpt Set.: a b
1 Send Result
*********************
3 JobFinish Notice
[ Exit ]
2 FAX RX Result
FAX RX Result: a b
*********************
2 On
3 Error/SubAddress
1 *Off
FAX RX Result Report
Completed
Result Rpt Set.: a b
*********************
2 FAX RX Result
3 JobFinish Notice
[ Exit ]
1 Send Result