FAX Operation (Basic)
3-7
3
IMPORTANT:
•If you select a high resolution, the image
becomes clearer. However, the higher the
resolution is, the longer the send time is.
•When you send originals at a resolution of 200 ×
400 dpi (Super Fine) or higher, the fax machine
on the receiving system needs to be capable of
receiving the originals at such image quality.
When the receiving system does not have
such capability, originals are sent at an image
quality of 200 × 200 dpi (Fine).
Selecting the Density
6 Adjusting the density when scanning originals
-4 to +4: You can adjust the density using 9 levels.
1 Press the Function Menu key.
2 Press the or key to select [Density].
3 Press the OK key.
4 Press the or key to select the desired
density.
5 Press the OK key.
Send Start
7 Press the Start key. Transmission begins.
NOTE: When On is selected in Destination Check
before Send, a destination confirmation screen is
displayed when you press the Start key. For details,
refer to Confirmation Screen of Destinations on
page 5-13.
Checking the Send Status
1 Press the Status/Job Cancel key.
Density:
a
b
4
v
Lighter -1
*********************
6
y
Darker
+1
5
*
w
Normal
0
To Next Page
Loading...
Need help?
General
