FAX Operation (Advanced)
4-25
4
Settings for Memory Forwarding from Embedded Web Server RX (Forward)
You can use Embedded Web Server RX on a computer connected to the network to specify the memory
forwarding settings on this machine.
Refer to the machine’s Operation Guide for information on the network settings.
NOTE: To fully access the features of the Embedded Web Server RX pages, enter the User Name and
Password and click [Login]. Entering the predefined administrator password allows the user to access all
pages, including Document Box, Address Book, and Settings on the navigation menu. The factory default
setting for the default user with administrator privileges is shown below.
† Upper case and lower case letters are distinguished (case sensitive).
Accessing Embedded Web Server RX
1 Launch your Web browser.
2 In the address or location bar, enter the machine's
IP address or the host name.
Examples:
https://10.180.81.1/ (for IP address)
https://MFP001 (if the host name is "MFP001")
The web page displays basic information about the
machine and Embedded Web Server RX as well
as their current status.
NOTE: If the screen “There is a problem with this
website's security certificate.” is displayed, configure
the certificate. For details on Certificates, refer to the
Embedded Web Server RX User Guide.
You can also continue the operation without
configuring the certificate.
3 Select a category from the navigation bar on the
left to view and set values for that particular
category.
Login User Name Admin
Login Password Admin
To Next Page
Loading...
Need help?
General
