FAX Operation (Advanced)
4-41
4
3 Press the OK key.
4 Press the or key to select [Polling Box].
5 Press the OK key.
6 Press the or key to select [OverwriteSetting].
7 Press the OK key.
8 Press the or key to select [Allowed] or [Not
Allowed].
9 Press the OK key.
Using Polling Transmission
1 Press the Document Box key.
2 Place the originals.
3 Press the or key to select [Polling Box].
4 Press the OK key.
5 Press the or key to select [Store File].
6 Press the OK key.
7 Press the Function Menu key.
8 Change the required functions for the original to be
stored. For information on using the functions,
refer to the machine’s Operation Guide.
Function Description
Original Size Select the size of originals to be scanned. Be sure to select
the original’s size when using custom size originals.
Original Image Select image quality.
Scan Resolution Chooses the level of detail used for scanning originals.
Orig. Orientation
To ensure that the originals are stored in the correct orientation,
this indicates which end of the original is the top. To use the
following functions, select the orientation of the originals.
•Duplex
Continuous Scan Allows you to divide originals that cannot be placed in the
document processor at one time into multiple scans and then
store the result as a single file. With this function, originals
continue to be scanned until you press [END Scan] (the
Right Select key).
File Name Entry
Allows you to rename the files created from scanned originals.
You can also use this function to add the job number and/or date.
To Next Page
Loading...
Need help?
General
