Operating instructions for the electronicVED plus electric instantaneous water heater 0020149585_00 9
3.1.7 Setting the maximum temperature
(to prevent scalding)
a
Danger!
Risk of being scalded by hot water.
The water temperature at the draw-off points
can reach up to 60 °C.
> When using an electronicVED plus electric
instantaneous water heater, be aware of
the risk of scalding from high outlet tem-
peratures.
> Set your electronicVED plus to a maximum
of 43 °C if you want to be protected from
scalding.
The scald protection function can only be deactivated at
the factory.
> Press the
MEMO and eco buttons simultaneously to
reach the
Menu.
Menu
Display settings
Scald protection
Consumption
Select language
ok
The cursor is next to the Display settings menu point.
> Press the
button.
The cursor is next to the
Scald protection menu point.
> Press the
ok button.
Scald protection
max. temperature
comfort temperature
ok
The cursor is next to the max. temperature menu point.
> Press the
ok button.
Set temperature
current: --°C
new --°C
-+ok
> Press the + button to increase the temperature.
> Press the — button to decrease the temperature.
> Press the
ok button to confirm the chosen tempera-
ture.
> Press the
button twice to return to the "Scald pro-
tection" menu.
The selected maximum temperature is displayed on the
top line of the water temperature display screen.
i
It is not possible to request a higher water
temperature than the temperature selected
and confirmed using the
ok button. Also note
that the maximum temperature interacts with
the
comfort temperature function.
Function and operation 3
To Next Page
Loading...
Need help?
General
