12 Operating instructions for the electronicVED plus electric instantaneous water heater 0020149585_00
procedure to reset the display of either the energy or
water consumption data.
> Press the
Reset button.
The display will be reset to 0.
> Press the
button to quit the display.
3.1.10 Setting the display language
> Press the
MEMO and eco buttons simultaneously to
reach the
Menu.
Menu
Display settings
Scald protection
Consumption
Select language
ok
The cursor is next to the Display settings menu point.
> Press the
button three times.
The cursor is next to the Select language menu point.
> Press the
ok button.
German
English
Bulgarian
Croatian
Polish
Serbian
Slowenian
ok
The language marked with an arrow is the language
used on the display.
> Press the
or button to change the display lan-
guage.
> Confirm this change by pressing the
ok button.
3.1.11 Setting the display lighting
> Press the
MEMO and eco buttons simultaneously to
reach the
Menu.
Menu
Display settings
Scald protection
Consumption
Select language
ok
The cursor is next to the Display settings menu point.
> Press the
ok button.
Display settings
Lighting
Output display
Volume flow display
ok
The cursor is next to the Lighting menu point.
> Press the
ok button.
Lighting
is auto
on
off
auto
ok
3 Function and operation