10 Operating instructions for the electronicVED plus electric instantaneous water heater 0020149585_00
3.1.8 Setting/activating and deactivating the
comfort temperature (scald protection)
> Press the
MEMO and eco buttons simultaneously to
reach the
Menu.
Menu
Display settings
Scald protection
Consumption
Select language
ok
The cursor is next to the Display settings menu point.
> Press the
button.
The cursor is next to the
Scald protection menu point.
> Press the
ok button.
Scald protection
max. temperature
comfort temperature
ok
The cursor is next to the max. temperature menu point.
> Press the
button once.
Scald protection
max. temperature
comfort temperature
ok
The cursor is next to the comfort temperature menu
point.
> Press the
ok button.
Set temperature
current: --°C
new -- °C
-+ok
> Press the + button to increase the temperature.
> Press the — button to decrease the temperature.
> Press the
ok button to confirm the chosen tempera-
ture.
> Press the
button to return to the "Scald protec-
tion" menu.
The comfort temperature selected here can be altered
by briefly pressing the +/- key combination. If water is
drawn off within the next 30 seconds, the water will be
heated to this temperature. If no water is drawn off in
this time, or if the water stops being drawn off, the dis-
play will return to the previous temperature setting.
To deactivate the
comfort temperature function, go to
the
Set comfort temperature menu on the display as
follows:
> Press the — button to decrease the displayed temper-
ature to below 20 °C.
-- °C will then be displayed. The comfort temperature
is then deactivated.
i
Also note the comfort temperature interacts
with the
max. temperature function.
3 Function and operation
To Next Page
Loading...
Need help?
General
