Vaisala Indigo80 - AC Adapter Related Precautions; ESD Protection

Remove the battery before shipping Indigo80 to Vaisala for repairs.
For shipping instructions, contact your nearest Vaisala Service Center.
See www.vaisala.com/support.
CAUTION!
Follow local laws and regulations to dispose of used or damaged
lithium-ion batteries in a safe manner.
CAUTION!
2.5.2 AC adapter related precautions
Make sure that the AC adapter you are using to charge Indigo80 is
an isolated power source that fulfills the requirements of one of the following:
• Limited-Energy Circuit (LEC) in accordance with IEC/EN/UL/CSA 61010-1
• Limited Power Source (LPS) in accordance with IEC/EN/UL/CSA 60950-1 or
IEC/EN/UL/CSA 62368-1, Annex Q
• Class 2 supply source that complies with the National Electrical Code (NEC),
NFPA 70, Clause 725.121 and Canadian Electrical Code (CEC), Part I, C22.1.
CAUTION!
For technical requirements of a compatible AC adapter, see Indigo80 specifications
(page 47).
Use the AC adapter only in its specified environmental conditions.CAUTION!
2.5.3 ESD protection
Electrostatic discharge (ESD) can damage electronic circuits. Vaisala products are adequately
protected against ESD for their intended use. However, it is possible to damage the product by
delivering electrostatic discharges when touching, removing, or inserting any objects in the
equipment housing.
To avoid delivering high static voltages to the product:
• Handle ESD‑sensitive components on a properly grounded and protected ESD workbench
or by grounding yourself to the equipment chassis with a wrist strap and a resistive
connection cord.
• If you are unable to take either precaution, touch a conductive part of the equipment
chassis with your other hand before touching ESD‑sensitive components.
• Hold component boards by the edges and avoid touching component contacts.
Indigo80 User Guide M212722EN-B
14