Vaisala Indigo80 - Configuring Environment Settings with Indigo80 Handheld Indicator

More information
‣
Devices menu (page 21)
‣
Connecting probes to Indigo80 (page 29)
4.3 Configuring environment settings with
Indigo80 handheld indicator
• Probe connection cable
For optimal measurement accuracy, you can use the Indigo80 handheld indicator to give
additional information about the connected probe’s measurement environment.
The environment settings available via Indigo80 correspond to the environmental
compensation settings of the probe. Therefore, Environment settings and
Settings > Compensation setpoints are interconnected: the configuration set in
either menu is applied to both.
1. Connect the probe(s) to the indicator.
2. Open the main menu by pressing .
3. Select Devices. If you have more than one device connected to the indicator, make a
further selection between the devices.
4. Select Environment settings to access the settings for your probe.
The available environment settings depend on the probe and probe firmware version.
For detailed information on the probe-specific requirements for the settings, such as
Pressure and Temperature, see your probe's user documentation.
5. Exit the menu by pressing
or return to the main menu by pressing .
More information
‣
Devices menu (page 21)
‣
Connecting probes to Indigo80 (page 29)
Indigo80 User Guide M212722EN-B
32