Vaisala Indigo80 - Measurement View; Figure 4 Types of Measurement Views in Indigo80; Figure 5 Measurement View with Sensor Purge Ongoing

3.3 Measurement view
The versatile measurement view of Indigo80 can be edited to show multiple types of views
and comparisons of measurement data from connected devices.
To access the measurement view, press and select Home in the Indigo80 main menu.
For more information on editing options, see Editing measurement view (page 18). The graph
view associated with the measurement view is introduced in Graph view (page 21).
1 2 3
5
4
Figure 4 Types of measurement views in Indigo80
1 Measurement view with four measurement parameters from one probe shown.
2 Measurement view with two measurement parameters from two probes shown.
3 Comparison view showing the measured values from two probes and their dierence
(indicated by the delta symbol).
4 Parameter list view showing all the output parameters available from the connected
probes.
5 The bars on the right indicate the number of views stacked vertically. Use the
and buttons on the keypad to move between views.
A pause in normal measurement activity (for example, because of sensor purge or unavailable
readings) is indicated by the caution symbol, a textual notification, and yellow font. The font
turns back to white once the measurement is stable again.
Figure 5 Measurement view with sensor purge ongoing
Chapter 3 – Indigo80 menus and views
17