Vaisala Indigo80 - Maintenance and Troubleshooting; Updating Indigo80 Firmware Version; Updating Firmware Version with Insight PC Software

7. Maintenance and troubleshooting
7.1 Updating Indigo80 firmware version
7.1.1 Updating firmware version with Insight PC software
• Firmware update package (.zip file) for Indigo80
• Computer with Microsoft Windowsâ operating system (64-bit version) and
Insight PC software (version 1.2.0 or later) installed
• USB-C cable for connecting Indigo80 to computer
Link to the latest Indigo80 firmware update package is available on the Indigo80
product page at www.vaisala.com/indigo80.
Updating Indigo80 firmware takes approximately 5 minutes. Do not disconnect
the USB cable during firmware transfer.
1. Make sure you have the latest Indigo80
firmware update package ('Indigo80-<version>-
firmware.zip') available on your computer.
Do not unzip the package, as Insight will only accept the file in .zip format.
2. Open Insight software on your PC.
3. Connect a USB cable to a free USB port on your computer.
4. Connect the other end of the cable to the USB-C connector located on the bottom of
Indigo80.
5. Switch Indigo80 on by pressing
(if not powered on already).
6. Wait for Insight to detect Indigo80.
Indigo80 User Guide M212722EN-B
40