Vaisala Indigo80 - Using Indigo80 with Insight PC Software; Vaisala Insight PC Software; Connecting Indigo80 to Insight PC Software

5. Using Indigo80 with Insight PC
software
5.1 Vaisala Insight PC software
Vaisala Insight PC software is a configuration software for Indigo-compatible probes and other
supported devices. Insight is available for Microsoft Windowsâ operating systems (64-bit
only).
For a full list of supported operating system versions, see www.vaisala.com/insight.
Insight PC software is available for download at www.vaisala.com/insight.
With the Insight PC software, you can:
• See device information and status
• See real-time measurement data from connected probes
• Configure transmitter settings
• Calibrate and adjust the connected devices
• Configure probe features and settings such as condensation prevention, compensation
setpoints, calculation coecients, sensor purge, filtering factor, and serial communication.
The available features and settings depend on the probe model and firmware version. For
more information, see your probe's user documentation at docs.vaisala.com.
Insight PC software version 1.2.0 and later support the Indigo80 indicator.
With Indigo80 connected to Insight, you can:
• Configure Indigo80 settings (for example, date, time, and user interface preferences)
• View, rename, delete, and export files containing logged data
• Update Indigo80 firmware version.
5.2
Connecting Indigo80 to Insight PC software
When connecting several devices at the same time, note that your
computer may not be able to supply enough power through its USB ports. Use
an externally powered USB hub that can supply >2 W for each port.
CAUTION!
• Computer with Microsoft Windowsâ operating system (64-bit version) and
Insight PC software (version 1.2.0 or later) installed
• USB cable with a USB-C connector (type C to A or type C to C)
Chapter 5 – Using Indigo80 with Insight PC software
33