VAMP Ltd Power monitoring unit
Operation and configuration
VAMP 260
VM260.EN004 Vamp 24h support phone : +358 (0)20 753 3264
17
2. Enter the password needed for the desired level: The
password may contain four digits. The digits are supplied
one by one by first moving to the position of the digit using
the RIGHT key and then setting the desired digit value
using the UP key.
3. Push ENTER.
3.2.2. Changing passwords
The set passwords can only be changed using a PC connected to
the local RS-232 port on the unit.
To Next Page
Loading...