VAMP 260 - User Averages

VAMP 260 Power monitoring unit
Technical description
VAMP Ltd
18
Vamp 24h support phone : +358 (0)20 753 3264
VM260.EN004
Setting parameters of timers:
Parameter: Value: Unit: Default: Description:
On hh:mm:ss - 07:00:00 Activation time of the timer
Off hh:mm:ss - 16:00:00
De-activation time of the
timer
For each four timers there
are 12 different modes
available:
-; - -
The timer is off and not
running. The output is
off i.e. 0 all the time.
Daily;
The timer switches on and off
once every day.
Monday;
The timer switches on and off
every Monday.
Tuesday;
The timer switches on and off
every Tuesday.
Wednesday;
The timer switches on and off
every Wednesday.
Thursday;
The timer switches on and off
every Thursday.
Friday;
The timer switches on and off
every Friday.
Saturday;
The timer switches on and off
every Saturday.
Sunday;
The timer switches on and off
every Sunday.
MTWTF;
The timer switches on and off
every day except Saturdays
and Sundays
MTWTFS;
The timer switches on and off
every day except Sundays.
Mode
SatSun;
The timer switches on and off
every Saturday and Sunday.
SagOn On; Off - On Sag on event
SagOff On; Off - On Sag off event
SwelOn On; Off - On Swell on event
SwelOf On; Off - On Swell off event
2.4. User averages
The device includes 8 freely configurable user average values.
The user can configure the monitored value and the time frame
inside which the average of the value is calculated. The time
can be set from 1 second to 60 hours.