EasyManua.ls Logo

Vanair Goodall CAP-START - Safety Precautions and Warnings; General Safety Information

Vanair Goodall CAP-START
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SECTION 1:
SAFETY
SECTION 1: SAFETY
090189-OP_r0 (JUNE-2022) 1 - 1
VANAIR MANUFACTURING, INC.
(844) VAN-SERV • www.vanair.com
Cap•Start Hydraulic-Driven
12V/24V • Battery Starter • Charger
1.1 GENERAL INFORMATION
IMPORTANT
Read this manual before operating
or servicing the Cap•Start Hydrau-
lic-Driven Package. Failure to do
could result in damage equipment,
bodily injury, or death.
The products provided by Vanair
®
Manufacturing,
Inc., are designed and manufactured for safe op-
eration and maintenance. But it is ultimately the
responsibility of the users and maintainers for
safe use of this equipment. Part of this responsi-
bility is to read and be familiar with the contents of
this manual before operation or performing main-
tenance actions.
1.2 DANGERS, WARNINGS,
CAUTIONS AND NOTES
These boxes are labeled clearly with the title
block listing either Danger, Warning, Caution, or
other non-safety issue. They draw attention to
speci c issues that are pertinent to the safe and
correct operation of the machine.
The symbols shown and de ned in Section 1:
Safety are used throughout this manual and on
the machine to call attention to, and identify, pos-
sible hazards.
The international warning symbol [
] is used on
all decals, labels and signs that concern informa-
tion pertaining to bodily harm. When you see
the international warning symbol, pay extremely
careful attention, and follow the given instructions
or indications to avoid any possible hazard.
1.3 SUMMARY OF DANGERS,
WARNINGS AND CAUTIONS
These boxed inserts are placed throughout this
manual in the sections where they apply. This
subsection is a general summary of their con-
tents.
1.3.1 DANGERS
Keep tools or other conductive objects away
from live electrical parts.
Never touch electrical wires or components
while the machine is operating. They can be
sources of electrical shock.
1.3.2 WARNINGS
DO NOT perform any modi cations to this
equipment without prior factory approval.
DO NOT install this Cap•Start in a con ned
space that lacks proper ventilation and air ow;
breathing and cooling air circulation must not
be compromised.
DO NOT operate the Cap•Start or any of its
systems if there is a known unsafe condition.
Disable the equipment by disconnecting it
from its power source. Install a lock-out tag to
identify the equipment as inoperable to other
personnel.
DO NOT operate the
machine with any by-pass
or other safety systems disconnected or ren-
dered inoperative.
DO NOT operate the equipment while you are
under the in uence of alcohol or drugs.
DO NOT operate the equipment while you are
feeling ill.
DO NOT attempt to service the equipment
while it is operating.
Before performing maintenance or replacing
parts remove all electrical power.
DO NOT use ammable solvents or cleaners
for cleaning the
machine or it parts.
DO NOT operate the Cap•Start in areas where
ammable, toxic, or corrosive fumes, or other
damaging substance can be ingested by the
Cap•Start intakes.
Keep arms, hands, hair and other body parts,

Table of Contents