SECTION 4: OPERATION
4 - 2 090189-OP_r0 (JUNE-2022)
VANAIR MANUFACTURING, INC.
(844) VAN-SERV • www.vanair.com
Cap•Start Hydraulic-Driven
12V/24V • Battery Starter • Charger
A
KEY DESCRIPTION
A DIGITAL DISPLAY PANEL
I
I
Refer to Figure 4-2 for ID & Navigation
Figure 4-1: Instrument Panel
4.4 ROUTINE SHUTDOWN PRO-
CEDURE (FIRST AND ROU-
TINE)
IMPORTANT
If start-up and shut-down procedures are not
followed, damage to the system and its compo-
nents may occur.
1. Shut off Charge or Start mode.
2. Shut off hydraulic power supply.
4.5 EXTREME CONDITION
OPERATION
When operating in extreme hot or cold conditions,
extra attention should be given to any indications
that could lead to a serious problem. Machine re-
view and maintenance check schedules should
be more frequent than the normal suggestions
given in Section 5, Table 5A, Routine Mainte-
nance Schedule.
To Next Page
Loading...