EasyManua.ls Logo

Vanair Goodall CAP-START - Illustrated Parts and Diagrams; Parts Ordering and Assembly Breakdowns

Vanair Goodall CAP-START
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SECTION 7: ILLUSTRATED PARTS LIST
090189-OP_r0 (JUNE-2022) 7 - 1
VANAIR MANUFACTURING, INC.
(844) VAN-SERV • www.vanair.com
SECTION 7:
ILLUSTRATED PARTS LIST
Cap•Start Hydraulic-Driven
12V/24V • Battery Starter • Charger
7.1 PARTS ORDERING INFORMATION
Part orders should be placed through the distributor from whom the unit
was purchased. If for any reason parts cannot be obtained in this man-
ner, contact the factory directly at the address or phone numbers below.
When ordering parts always indicate the Serial Number of the machine
package. This can be obtained form the Bill of Lading for the machine
package, or from the unit’s serial number plate. See Figure 7-1 for loca-
tion of machine package serial plate. Consult Table 7A: Recommend-
ed Spare Parts List on the next page for a listing of replacement parts.
Vanair Manufacturing, Inc.
10896 West 300 North
Michigan City, IN 46360
Telephone (toll free): (800) 526-8817
Service (toll free): (844) VAN-SERV
(844) 826-7378
Telephone: (219) 879-5100
Service Fax: (219) 879-5335
Parts Fax: (219) 879-5340
Sales Fax: (219) 879-5800
www.vanair.com
Figure 7-1: Machine Serial Plate/Serial Number Location
NOTE
When contacting the Vanair Service Department, please
have machine serial number on hand to quickly expe-
dite service. Serial number can be located on the serial
plate, as shown.

Table of Contents