VarioCooking Center 211 - Parameters

Ethernet port
Parameters
Procedure
Youmustrstconnecttheunittothelocalarea
network. See paragraph "connections".
A. Go to the communication menu.
B. In the communication menu select the IP
address settings menu.
C. Set in turn the IP address, the subnet
mask and the gateway address.
The IP address settings will be given to
you by your local network administrator.
v03 • July-2016 • Hen
Communication Module
V.19
Line Units Serial number (starting from) Sw Revision
VCCM
VCCWE
All ExxXH1009xxxxxxx 01-00-08
A
C
B