VAT 650 Series - Page 29

Installation, Operating & Maintenance Instructions
Series 650 DN 100-250 (I.D. 4“ - 10”), CC-Link
VAT Vakuumventile AG, CH-9469 Haag, Switzerland
Tel +41 81 771 61 61 Fax +41 81 771 48 30 CH@vatvalve.com www.vatvalve.com
280672EB
2010-12-15
29/94
Setting for first and last valve in the
chain
Terminating resistor ON
2.6.10.2 Link cable
RJ45 pinning: active pins 4 and 5
Pin Description
1 not used
2 not used
3 not used
4 Data
5 Data
6 not used
7 not used
8 not used
VAT recommends a cable with the following specification:
• Standard patch cable
• Category 5 or higher
• Double ended with shielded RJ45 connector
• Straight through connection 1:1