Need help?Do you have a question about the Vdwall LVP300 and is the answer not in the manual?
General| Model | LVP300 |
|---|---|
| Product Type | Video Processor |
| Maximum Resolution | 1920 x 1080 |
| Seamless Switching | Yes |
| Fade-in/Fade-out | Yes |
| Input Ports | HDMI, VGA, DVI |
| Processing | 10bit |
| Control | RS232 |
High voltage warning for processor maintenance.
Warnings about water, fire sources, unusual noise, and hot-swappable cables.
Cautions regarding reading manual, unplugging, operation, vents, placement, and cord handling.
Lists the standard accessories included with the LED Video Processor.
Diagram showing the rear panel with numbered ports.
Details input, output, and other ports like RS232 and RF.
Illustrates the overall connection setup for the LVP300.
Details input number, type, video system, amplitude, and impedance.
Details video signal output types, formats, and connectors.
Details VGA, DVI, HDMI, USB, SDI formats and input connectors.
Details connector types for various input/output signals.
Provides detailed dimensions and weight of the LVP300 unit.
Explains the V1, V2, VGA, HDMI, DVI, EXT., Take buttons for input selection.
Describes buttons for setup, brightness, VGA auto-adjust, switching time, and bypass.
Describes buttons for Picture-in-Picture/Picture-by-Picture and image freezing.
Details the Brt+, Brt- buttons for adjusting output brightness.
Explains "One key switching" and "Pre.+Take switching" for input selection.
Describes the LCD display and operation for one key switch.
Explains the LCD display and operation for Pre.+Take switch.
Details using the C/F button to set switching transition times.
Explains how to insert a PIP window and operate PIP/PBP mode.
Covers brightness selection, VGA auto adjustment, and full/part display.
Explains how to overlap text, logos, or flash on the current image.
Details freezing the image and viewing device information.
Guide to configure output image settings via the setup menu.
Explains how to set the output format from fixed or custom options.
Details setting output image size and location parameters for the LED screen.
Describes generating test patterns for LED screen testing.
Guide to configure input video signal settings via the setup menu.
Explains setting DVI EDID for compatibility.
Details selecting between "one key switch" and "Pre.+Take switch" modes.
Covers text overlay operation and parameter configuration.
Details custom color, sharpness, and brightness settings.
Explains selecting between Chinese and English language settings.
Lists advanced settings including ADC calibration, Bias, EXT. Input Model, De-Interlace.
Explains calibrating white balance for analog signals.
Details adjusting Bias to reduce noise and improve low gray scale images.
Describes configuring extended modules after replacement.
Explains using De-Interlace to remove trembles from interlaced signals.
Details selecting between 0-64 and 0-100 brightness levels.
Explains the DVI hot plug signal and how to turn off the function.
Describes how to initialize the LVP300 to factory default settings.
Explains setting up three user-defined PIP/PBP modes, adjusting parameters.
Explains using RS232 for remote control operation via PC.
Provides an overview of the main interface of the LVP300 control software.
Details setting up COM port connection and checking on Device Manager.
Explains selecting between Chinese and English language for the software interface.
Describes how to switch signals using the software, including auto adjustment and modes.
Explains buttons for PIP/PBP, M1/M2/M3, Text, Bypass, and Freeze functions.
Describes the info bar, and setting up timed input signal switching.
Details classifying and setting up schedules for daily, weekly, or monthly timing.
Explains setting output parameters like PIP size, position, brightness, bias, color, sharpness.
Details setting output window parameters based on LED resolution.
Explains settings for PIP/PBP modes, background size, and PIP window size.
Describes setting proper threshold values for input signals for text overlay.
Details adjusting brightness, color, bias, and clarity using the software.
Explains how to set the output resolution via a dropdown box in the software.
States copyright ownership and usage restrictions for the manual.
A table listing version history and modifications made to the product.
To Next Page
