Vectronix PLRF10C - Troubleshooting: Low Battery Indicator (LobA); Troubleshooting: Object Measurement Discrepancies; Troubleshooting: Night Mode in Daylight (ntOn)

Troubleshooting PLRF10C/15C-2.0en
41
"LobA" is displayed
The battery is almost used up Replace battery (see page 12)
The device measures objects in
front or behind the intended
object
"3dOF" is set in the
configuration menu, only the
distance with the highest return
signal is displayed
Select "3dOn" in the
configuration menu (see page
24)
"ntOn" is displayed after a
measurement
The device is used during
daylight conditions with "ntOn"
selected in the configuration
menu
Select "ntOF" in the
configuration menu
(see page 24)
Problem Possible cause Solution