33
VECTOR ™- USMC VECTOR 21-V.0.3
Settings
In certain applications, it may be
desirable to limit the closest
distance that the VECTOR will
measure.
Click the distance key three
times in rapid succession. ”diSt
GAtE“ appears, followed by the
current setting.
Click the azimuth key until the
desired minimum distance
appears (e.g. 500 m).
Depending on VECTOR model
the range gates will be different.
Setting the minimum
distance to "5 SI-U"
disables the range gate (default
gate = 500m).
Click the distance key three
times in rapid succession to
save the setting.
If you do not press the distance
key, the previous setting remains
unchanged and "Old GAtE" is
displayed.
"GAtE on" is displayed
when closer ranges are
measured.
Range gate
3x
3x
i
i
To Next Page
Loading...