VECTOR ™- USMC VECTOR 21-V.0.3
30
Configuration
Using the VECTOR with a night vision device
Remove binocular enhancer
when attached.
Remove the eyecup from the
right eyepiece.
Rotate the right eyepiece to
adjust it to 0 dioptres.
Then slide the eyepiece fully
inwards.
Adjust the eyepiece on the night
vision device to suit your
eyesight. Standard setting:
0 dioptres.
Remove the protective lens cap.
Rotate the lens counter-
clockwise all the way out
Fit the adapter, and screw it
firmly to the tripod bushing.
To Next Page
Loading...