35
VECTOR ™- USMC VECTOR 21-V.0.3
Settings
Declination setting/correction
Click the azimuth key three
times in rapid succession.
The stored declination value is
displayed.
When used with PLGR (or
other device determining
declination (MAGVAR))
declination must be set at
"0".
Distance key
• short click: the declination value
changes by one unit per click.
• long click (hold down the key
for longer than half a second):
the declination value changes
continuously.
Use the azimuth key to
change between increment
and decrement !
Click the azimuth key three
times in rapid succession to
store the new declination value.
If the azimuth key is not correctly
clicked three times, the previous
settings remain unchanged and
”Old dECL” is displayed.
3x
3x
!
i
To Next Page
Loading...