53
VECTOR ™- USMC VECTOR 21-V.0.3
Care/cleaning
The VECTOR’s performance
and serviceability are
conditional on regular care and
immediate attention to
problems:
• Do not touch glass lenses with
fingers.
• Do not soil the operating keys
with oil or grease.
• Avoid abrupt temperature
transitions, since these can
cause condensation moisture
to develop inside the
VECTOR.
The VECTOR does not need
special care or cleansers.
Therefore
• do not use any kind of
impregnated cloth intended for
cleaning spectacle lenses,
• do not use any solvent except
water, e.g. no alcohol or
cleansers.
Lens cleaning
Particles of dirt should be blown
off or removed using a soft brush.
Finger prints may be cleaned
first by wiping with a damp cloth,
followed by soft, clean optical
tissue or chamois leather.
Cleaning the casing
Wipe the casing with a damp
cloth.
Pay special attention to dirt and
grease around the keys.
Blow out the VECTOR interface
cable socket, and clean it
carefully.
Allow the VECTOR to dry fully
before packing.
Cleaning the interface cable
Protect the cable from damp
and dirt as much as possible!
Wipe the cable with a damp
cloth. Blow out soiled cable
plugs with clean air, and leave
them to dry.
Care / cleaning
To Next Page
Loading...
Need help?
General