VECTOR ™- USMC VECTOR 21-V.0.3
32
Settings
Setting the measurement units
Settings
Various angle and distance
measurement units may be set
via the configuration menu.
Click the azimuth key five times
in rapid succession.
”Unit SEtt” appears briefly,
followed by the measurement
units currently in use by the
VECTOR.
Click the distance key until the
desired units appear in the field
of view:
• at the left: angular unit in mils
or degrees
• at the right: distance unit in
metres (SI-Unit) or feet.
Click the azimuth key five times
in rapid succession to save your
preferred units.
If the azimuth key is not correctly
clicked five times, the previous
settings remain unchanged and
”Old Unit” is displayed.
5x
5x
To Next Page
Loading...