VECTOR ™- USMC VECTOR 21-V.0.3
44
Settings
Setting VECTOR back to factory settings
Click the azimuth key eight
times in rapid succession.
"rSt to dEFAULt" is displayed
followed by "no YES".
Click the azimuth key eight
times in rapid succession to
set VECTOR to factory settings.
"Stor dEFAULt" is displayed.
If not done correctly, the settings
remain unchanged and
”no CHAnGE” is displayed.
Azimuth key
• YES: allows to change back to
factory settings
Distance key
• no: keeps current settings
8x 8x
To Next Page
Loading...