Veeder-Root EMR3 - Tokheim, Daniels & Donovan Flow Meter Installation; Figure 6. Adapter Shaft Group and Groove Pin for Tokheim, Daniels, & Donovan

EMR3 Truck Installation Installation Procedures - Fuel Oil Truck Application
10
TOKHEIM, DANIELS & DONOVAN FLOW METER INSTALLATION
Table 3 lists the parts included in the EMR
3
approved kit. In addition to the “Installation Procedure” on page 6, see
Figure 7 on page 11, Figure 8 on page 12, and Figure 9 on page 13 for instructions on how to disassemble then
reassemble the calibrator.
Table 3.- Display Head-to-Tokheim, Daniels & Donovan Adaptor Kit 846000-004
Item Qty V-R P/N
Washer - 0.258 x 0.010 x 0.500 2 011071-325
Wire - Sealing 24” (610 mm) LG 1 011853-285
Coupling - Slot 0.156 W 1 065004-010
Screw - 0.250-28 x 0.62 Hex 4 503615-001
Lockwasher - 0.256 x 0.02 4 510003-006
Groove Pin - 0.125 D x 0.750 T 1 510105-140
Groove Pin - 0.063 D x 0.781 T 1 510105-177
Retaining Ring 2 511810-001
Group - Adapter Shaft 1 331431-001