Introduction Available Parts
2
Available Parts
All available EMR
3
system parts, including options, are listed below.
• Display Head (P/N 84569X-XXX) - standard
• Keypad Group (P/N 846000-014) - optional
• Bracket with internal V-R Encoder Installation Kit (P/N 846000-015) - included with Display Head
• C&C Corner Switch Group, Normally Open (P/N 846000-018) - included with Display Head
• Printer Kit (P/N 846000-020) - optional
• Temp Probe Kit (P/N 846000-002) - replacement
• Thermowell group - UL/cUL Listed, 350 psi working pressure, Canadian W&M Approved (P/N 0331373-001)
• 3-Way Solenoid Valve Kit (P/N 846000-028) - optional
• Interconnection Box (P/N 845893-XXX) - standard
• Display Head Hookup Cable: 4-conductor cable from 6 to 500 feet (1.83 to 152.4 m) lengths (P/N 846000-
1XX)
• Emergency Stop Switch (ESS) Kit (P/N 846000-021) - optional
• Remote Display Head (P/N 84569X-X2X) - optional
• Remote Display Bracket Install Kit (P/N 846000-024) - optional
• RS-232 Cable Kit (P/N 330020-431 [1 foot{30.5 cm}, -432 [10 feet {3.04 m}]) - optional
• Top Mount Remote Pulser Kit (P/N 330020-504) - Requires Remote Display Head - optional
• Front Mount Remote Pulser Kit (P/N 330020-505, 330020-506) - Requires Remote Display Head - optional
• C & C Front Mount Switch Kit (P/N 330020-507) - for use with Remote Pulser/Remote Display Head
combination - optional
• Epson TM-U220A Roll Printer Only (Cable in installation kit) (P/N 0576015-011)
To Next Page
Loading...
