Veeder-Root TLS-350 - Setting up Additional 3-Wire C.L. Sensors

22-3
22 3-Wire C.L. Sensor Setup Setting Up Additional 3-Wire C.L. Sensors
• ANNULAR SPACE •DISPENSER PAN
• MONITOR WELL •STP SUMP
• PIPING SUMP
When the correct category displays, press ENTER.
Setting Up Additional 3-Wire C.L. Sensors
If you have additional sensors to configure, press STEP, if necessary until you see the ENTER SENSOR
LOCATION message. Press TANK/SENSOR to select another sensor and follow the procedures described in the
preceding sections, beginning with “3-Wire C.L. Sensor Location” on page 22-2.
If you have entered setup information for all sensors, press FUNCTION to exit.