4-7
4 Prior to Applying AC Power to the Console Applying AC Power to the Console
and the front panel display will read:
3. Press the ALARM/TEST key to silence the audible alarm. Slide the Battery Backup switch (S1 or SW1) to the
ON position. After a few seconds, the alarm light will go out and the front panel display will read:
4. You can now begin the System Setup procedure.
MMM DD, YYYY HH:MM:SS XM
BATTERY IS OFF
MMM DD, YYYY HH:MM:SS XM
ALL FUNCTIONS NORMAL
To Next Page
Loading...
