Site Considerations Selecting a Console Location
6
• A maximum relative humidity of 95% RH (non-condensing) at temperatures up to 40°C.
• Console may be powered by either 120 or 240 Vac. A switch-mode power supply automatically detects the input
voltage (no jumpers required).
• Main supply voltage fluctuations not exceeding ±10%.
• Pollution Degree Category 2.
• Installation Category II.
Consoles must be installed within the interior of buildings. They are not suitable for any external location.
Ensure that the console is located where neither the console nor its associated cabling will be damaged by doors,
furniture, barrows, etc. Consider the ease of routing wiring, ducting, and probe cables to the console. Check that the
mounting surface material is strong enough to support the console’s weight of about 4 pounds.
If the unit requires cleaning, do not use any liquids, wipe only with a clean, dry cloth.
To Next Page
Loading...
