A product or a Group of products can be set to travel to
a certain position.
The example shows how to set a roller shade to close by
50%.
1
Locate the product in question, see section Locating and
operating a product.
2
Product chosen is displayed. The example shows roller
shade No. 2 (indicated as "Blind").
3
Press and hold key
and watch the display. Each black
spot corresponds to the roller shade closing in 10% incre-
ments. Five black spots thus correspond to it closing by
50%.
Release key
and the roller shade will travel to the pos-
ition chosen.
N o t e : A short key pressure will make the roller shade travel
to maximum top or bottom position.
Some decoration and sunscreening products can be
operated in two ways. For instance, a Venetian blind can
be drawn up and down and its slats can be tilted. Once the
product has been located, choose Tilt
or Turn with
the navigation keys .
Choosing positions
To Next Page
Loading...
Need help?
General
