Velux KLR 100 User Manual

VELUX 31
Enter Back
Set position
Save position
P1
P2
Menu
No. 1
Window
Locate
Program settings Record
No. 1
No. 2
No. 3
My program
Enter
No. 1
Edit
House
WINDOW
HOUSE
WINDOW
HOUSE
P1
P2
P1
P2
POSITION
Select
Back
ENGLISH
ENGLISH
My program is an automatically activated program which
contains a sequence of operating commands for one or
more products. The sequence is automatically activated at
a pre-set time within a period defined by a starting date
and an end date.
The example shows how to program skylight No. 1 (indi-
cated as "Window" in the remote display) to open
at 6.30 pm and close again at 10.00 pm each Monday for
12 months.
1
Press "Menu".
2
Scroll through the menus:
Note: If the current time and date has not been set
already, please do so before choosing "My program", see
section Time and date.
3
Locate the skylight. The relevant product can be identi-
fied by pressing for a short period of time. This will
activate the product briefly.
Press
"Select" to choose the product.
4
The display shows the selected product.
•Press
"Enter" to confirm your choice.
•Press "Edit" to select additional products from the
list.
5
P r e s s to highlight "Set position".
Press "Enter" to confirm your choice.
My program

Velux KLR 100 Specifications

General

Product type	Remote Control
Frequency	868 MHz
Power source	Battery
Compatibility	VELUX INTEGRA products
Range	300m (open air)
Battery Type	2 x AA Alkaline
Operating Range	Up to 30m indoors