Velux KLR 100 User Manual

VELUX 45
Menu
No. 1
Window
Locate
Enter Back
On
Off
P1
P2
Enter Back
Display light
Sleep mode
P1
P2
User settings Display
DISPLAY
House
SLEEP MODE
03:43 am
ENGLISH
ENGLISH
Sleep mode
The life of the batteries can be prolonged by setting the
remote control to go into sleep mode. When it has been
set to go into sleep mode, the light in the display will be
turned o 20 seconds after the latest key pressure. Time
is shown.
Press any key to activate the remote control again. How-
ever, the stop key
can be used at any time.
The example shows how to set the remote control to go
into sleep mode.
1
Press "Menu".
2
Scroll through the menus:
3
P r e s s to highlight "Sleep mode".
Press "Enter" to confirm your choice.
4
P r e s s to highlight "On".
Press "Enter" to confirm your choice.
5
When the remote control is in sleep mode, time is shown.
N o t e : Choose "O" in item 4 if you do not want the
remote control to go into sleep mode.

Velux KLR 100 Specifications

General

Product type	Remote Control
Frequency	868 MHz
Power source	Battery
Compatibility	VELUX INTEGRA products
Range	300m (open air)
Battery Type	2 x AA Alkaline
Operating Range	Up to 30m indoors