Velux KLR 100 User Manual

36 VELUX
Menu
No. 1
Window
Locate
Record Shortcut P1/P2
Select
No. 1
No. 2
No. 3
P1
P2
Back
Enter Back
Set position
Save position
P1
P2
Program settings
Enter
No. 1
P1
P2
Edit
House
WINDOW
HOUSE
WINDOW
HOUSE
POSITION
ENGLISH
ENGLISH
Program under Shortcut P1/P2
A program under Shortcut P1/P2 contains a sequence
of operating commands for one or more products. The
sequence is activated by pressing shortcut key P1 or P2.
You can record up to eight programs, four under each of
the shortcut keys. The programs can be set to be execut-
ed immediately, with a delay or at a certain time.
The example shows how to program skylight No. 1
(indicated as "Window" in the remote display) to open
immediately and close again after 1 hour and 30 minutes
(delay) by a single pressure on shortcut key P1.
1
Press "Menu".
2
Scroll through the menus:
N o t e : If the current time and date has not been set al-
ready, please do so before choosing "Shortcut P1/P2", see
section Time and date.
3
Locate the skylight. The relevant product can be identi-
fied by pressing for a short period of time. This will
activate the product briefly.
Press "Select" to select the product.
4
The display shows the selected product.
•Press "Enter" to confirm your choice.
•Press "Edit" to select additional products from the
list.
5
P r e s s to highlight "Set position".
Press "Enter" to confirm your choice.

Velux KLR 100 Specifications

General

Product type	Remote Control
Frequency	868 MHz
Power source	Battery
Compatibility	VELUX INTEGRA products
Range	300m (open air)
Battery Type	2 x AA Alkaline
Operating Range	Up to 30m indoors