Velux KLR 100 User Manual

VELUX 37
Enter Back
P1
P2
100% open
Back
Set position
Save position
P1
P2
Enter Back
Delay
Starting time
P1
P2
Enter Back
P1
P2
00 h 00 min
Enter Back
P1
P2
Enter
00 h 00 min
SET POSITION
POSITION
TIME CONTROL
DELAY
DELAY
ENGLISH
ENGLISH
6
P r e s s to set the opening position of the skylight.
100% corresponds to fully open.
Press "Enter" to confirm your setting.
7
P r e s s to highlight "Save position".
Press "Enter" to confirm your choice.
8
The display shows two time setting options.
Press
to highlight "Delay", ie the time that will pass
from pressing P1 till the product will be activated.
Press "Enter" to confirm your choice.
9
P r e s s to set the relevant delay. First choose minutes.
Choose 0 minutes if you want the skylight to open im-
mediately.
Press "Enter" to change to hours.
10
P r e s s to set hours.
Press "Enter" to confirm your setting.

Velux KLR 100 Specifications

General

Product type	Remote Control
Frequency	868 MHz
Power source	Battery
Compatibility	VELUX INTEGRA products
Range	300m (open air)
Battery Type	2 x AA Alkaline
Operating Range	Up to 30m indoors