Closing skylights
In case of power failure
The chain can be disengaged by removing
the plug in the center of the bottom sash
and turning the screw, with the provided
2.5 mm hex key, clockwise until it stops.
N o t e : The chain can be re-engaged by
executing the above procedure in reverse
order.
If the remote control has been mislaid
The sash can be closed by inserting a
pointed object in the operator cover hole
marked A and pressing briefly.
Note: A battery backup unit can be con-
nected. Please contact VELUX for further
information.
Power failure / Mislaid remote control
To Next Page
Loading...
