Time and date
Time and date must be set manually the first time the
remote control is to be used. The time and date format
can be set in item 4 by choosing "Set format".
The example shows how to set the time. The date is set
correspondingly by choosing "Date" in item 3.
1
P r e s s "Menu".
2
Scroll through the menus:
3
P r e s s to highlight "Clock".
Press "Enter" to confirm your choice.
4
P r e s s to highlight "Set time".
Press "Enter" to confirm your choice.
5
P r e s s to set minutes.
Press "Enter" to change to hours.
6
P r e s s to set hours.
Press "Enter" to confirm your settings.
Time is shown automatically when the remote control is
in sleep mode. See section Display.