S-12
04/2005
GENERAL
Unauthorized changes or the substitution of unauthorized parts can compromise the
equipment designs. This can result in unsafe conditions for either the service personnel
or the equipment users. Always refer to the appropriate parts and service manual for
replacement parts and maintenance instructions. If questions arise, contact the Technical
Services Department of the SandenVendo America, Inc. office in your area.
When servicing the vending machine, always reassemble all components to their original
location and position. Maintain the correct routing for tubing, electrical wiring, etc..
Replace all clamps, brackets, and guides to their original locations. Replace all tubing,
sleeving, insulating material, and protective covers to their original condition.
A. Service Cord Replacement
SandenVendo America, Inc. vending machines are furnished with unique power
supply cords. If replacement becomes necessary, consult the appropriate parts
and service manual and order the correct replacement cord for the model of
vending machine in question. Do not use substitute replacement cords. Only
authorized service personnel with appropriate training should replace the vending
machine service cord. If a question should arise concerning which service cord to
order, contact the Technical Services Department of the SandenVendo America,
Inc. office in your area.
SECTION VI: SUBSTITUTIONS AND MODIFICATIONS
VENDO EQUIPMENT HAS BEEN PROVIDED WITH APPROPRIATE PROTECTIVE
DEVICES TO PROTECT AGAINST THE POSSIBILITY OF OVERHEATING AND
FIRE AS A RESULT OF EQUIPMENT OR COMPONENT FAILURES.
SUBSTITUTION, MODIFICATION, OR BYPASSING OF SUCH PROTECTIVE
DEVICES CAN CREATE DANGEROUS CONDITIONS. PROTECTIVE CIRCUITS
SHOULD NEVER BE BYPASSED, AND FAILED PROTECTIVE DEVICES MUST
BE REPLACED ONLY WITH FACTORY-AUTHORIZED PARTS.
WARNING
To Next Page
Loading...
Need help?
General
